Shoes
C2U-TAURUS
Protective footwear with semi-rigid sole that controls movement; ideal for the management of metatarsalgia and Morton’s neuroma.
In the “downloadable material” section below you will find the technical sheet, the user manual and the algorithm.
Made of soft leather, these boots are equipped with practical adjustable velcro that adapt perfectly to most feet. It is able to accommodate a customized insole to offer the right support to the patient. The rigid sole ensures a stable and safe walk, avoiding hyperload in the forefoot.
MAC 2 complies with the International Guidelines for the management of the diabetic foot
– high risk – risk 3 (foot without loss of protective sensation and/or peripheral arterial disease and/or severe deformity, previous ulceration or amputation).
– toe arthrodesis;
– Charcot foot in chronic phase (high MAC2).
In accordance with the Recommendations of the International Guidelines of the IWGDF on the prevention of the foot at risk and in the remission phase.
Please read the size guide carefully before choosing our products.
The cleaning of the product must be carried out as described:
The shoe must absolutely NOT be washed by immersion, under running water or in the washing machine.
For uppers in technical fabric, use a cloth slightly dampened with water and neutral soap, rub gently and leave to dry;
For uppers in leather, use special creams (moisturizing-polishing) specific for the type of leather to be treated and approved by the EEC, spread and polished with a clean, dry, soft and non-abrasive cloth;
In the case of suede or similar, use only brushes or soft cloths and only on dry leather to remove any stains (mud and similar);
Make sure to regularly hydrate the leather by applying special creams, especially in the case of particularly soft leathers such as nappa, deer and deer;
Do not use alcoholic liquids, abrasive liquids, detergents, alcohol, laundry detergents, bleach, ammonia, solvents;
Do not use abrasive materials and/or products, brushes, steel wool, sandpaper, blades or similar, to remove stains or residues;
For the lower lateral surface of the sole, use soft sponges moistened in warm water, maximum 30 C° and neutral soap;
If the product is accidentally damp, leave to dry in the air, away from heat sources and in a non-humid environment. Do not dry the damp or wet product in front of heat sources: this could cause inevitable damage to the shoe with consequent loss of warranty.
Optima Molliter S.r.l. is NOT responsible for damage caused by abrasive products, products that attack materials, direct exposure to heat sources and improper use/maintenance.
Tutorial created in collaboration with Doctor Gabriele Montini.