Shoes

C1D DINO

Protective footwear with semi-rigid sole that controls movement; ideal for the management of metatarsalgia and Morton’s neuroma.
In the “downloadable material” section below you will find the technical data sheet, the user manual and the algorithm.

Made of soft leather, these sandals are equipped with practical adjustable Velcro straps that adapt perfectly to many feet. It is able to accommodate a customized insole to offer the right support to the patient. The semi-rigid sole ensures a stable and safe walk.

MAC 1 complies with international guidelines for the management of diabetic foot

– very low risk – risk 0 (foot without loss of protective sensation, without peripheral arterial disease, without deformity).
– low risk – risk 1 (with loss of protective sensation or peripheral arterial disease).

In accordance with the Recommendations of the IWGDF International Guidelines on the prevention of high-risk foot

Consult the size guide carefully before choosing our products.

Cleaning the product must be carried out as described:

The footwear must absolutely NOT be washed by immersion, under a jet of water or in the washing machine.
For the technical fabric upper, use a cloth slightly dampened with water and neutral soap, rub gently and leave to dry;
For leather uppers, use specific creams (moisturizing-polishing) specific for the type of leather to be treated and approved by the EEC,  spread and polished with a clean, dry, soft and non-abrasive cloth;
In the case of suede or similar, only use brushes or soft cloths and only when the skin is dry to remove any stains (mud and similar);
Make sure to regularly hydrate the leather by applying specific creams, especially in the case of particularly soft leathers such as nappa, deer and cevati;
Do not use alcoholic liquids, abrasive liquids, detergents, alcohol, laundry detergents, bleach, ammonia, solvents;
Do not use abrasive materials and/or products, brushes, steel wool, glass paper, blades or similar to remove stains or residues;
For the lower lateral surface of the sole, use soft sponges moistened in warm water, maximum 30 C° and neutral soap;
If the product accidentally gets damp, leave to air dry, away from heat sources and in a non-humid environment. Never dry the damp or wet product in front of heat sources: this could lead to inevitable damage to the shoe with consequent loss of warranty.

The company Optima Molliter S.r.l. It is NOT responsible for damage caused by abrasive products, products that attack materials, direct exposure to heat sources and improper use/maintenance.

Tutorial realizzato in collaborazione con il Dottor Gabriele Montini.